- 中文
hrmasterbatch@163.com
Material composition
Component CAS. NO component proportion%
Dispersant 108-21-5 3
LDPE 955 18
Calcium oxide powder ML-838 75
PE cracking wax 68441-Z 4
Scope of application
1.8558, 8658, 8758, 8098, 8108, 8118 The content of anatase titanium dioxide in this series of products increased in turn, mainly used for blowing films of low and medium grade PE, PP, HDPE, and also applicable to plates and sheets. It belongs to anatase titanium dioxide product.
2. 8128、8148、 8158. 8178 The content of rutile titanium dioxide in this series of products increases in turn, and the dispersibility and covering ability of the products are better than that of series 1 products, which are widely used in blowing film, protective film, casting film and breathable film of sanitary materials. It belongs to rutile titanium dioxide product.
Product features
序号 | 项目 | 技术指示 |
1 | 外观 | 圆柱体颗粒均匀、色泽一直 |
2 | 钛白粉种类 | 金红石型，锐钛型 |
3 | 耐热性 | ≥200℃ |
4 | 耐迁移性 | ≥4级 |
5 | 耐晒性 | ≥6级 |
6 | 含水率(%) | ≤0.02 |
7 | 钛白粉含量(%) | 25--70 |
8 | 遮盖率 | 优良 |
Product advantages
Bright color, good dispersion, high concentration and good stability
Product application
20% - 80% titanium dioxide content in blown film, cast film, injection molding, blow molding, blister PP/PE/LDPE/HDPE/etc
Warm reminder
Mix with the polymer thoroughly and evenly before use. In case of fish-eye phenomenon, dry it or add the water remover produced by our company that meets your company's requirements.
The above information is based on the characteristics and usage of the product provided by the current knowledge level of the company, and ensures the quality of the product under normal use. However, due to the diversity of plastic raw materials, users need to confirm whether the product performance meets the needs and make choices.
Follow us： 
Scan code to obtain solution：
© Copyright - 2010-2023 : All Rights Reserved.
© Copyright - 2010-2023 : All Rights Reserved.
